Welcome to Certabo forum

Both posts in italian and in english are accepted on the forum to help everybody to provide contribution irrespective to geographical location. Object of the forum is to provide technical information on various items and help developer and users to personalise software for Certabo chessboards. User explicitly accepts the conditions of use of this forum here reported.

A brief introduction of user is always appreciated in section Welcome to….

Benvenuti nel forum di Certabo

Sul forum possono essere postati articoli sia in lingua italiana che inglese per permettere a tutti di dare il proprio contributo da diversi luoghi geografici. Il forum ha come scopo fornire informazioni tecniche in generale e aiutare gli sviluppatori ed utenti a personalizzare software per le scacchiere Certabo. L’utente accetta esplicitamente le condizioni del presente forum consultabili qui.

Un breve saluto del nuovo utente è sempre gradito nella sezione Benvenuti a….

Please or Register to create posts and topics.

Playing from a position using Messchess

camfisher_nz@camfisher_nz
67 Posts
#1 · January 24, 2022, 9:58 am

Hi all,

 

I have been enjoying playing against the ROMs using Messchess, however I can only play from the initial starting position. Is there any way to set up a position on the board and play from that point?

Click for thumbs down.0Click for thumbs up.0
Pietro@pietro-mandurino
352 Posts
#2 · January 25, 2022, 9:44 pm

Hello Cameron

As far as we are aware that is not possible, as the emulation of the ROM just allow to start from staring position and we had to disable the play from position.

If some specific ROM allows to set a position it may be possible to check we shall forward question to Franz Huber  but I'm not sure we can exchange a Fen string with the emulator.

Maybe Bryan who has lot of experience with that emulator can add some info.

All the best

Pietro

 

 

Click for thumbs down.0Click for thumbs up.0
dsommerfeld@dsommerfeld
29 Posts
#3 · January 26, 2022, 2:04 pm

Hi Cameron,

the emulations of the messproject are not typical UCI engines. So there are a lot of features you can only use if you run the emulations directly. In this case you can move in the original menu of the chess computer, but you don't have a certabo connection.

If you use the Emulations as an UCI Engine like the Certabosoftware or other GUIs, you can setup th strength and something else and play from a starting point. That is the only way to play old emulations with an external board.

For position analytics it is better to use a normal strong engine like stockfish.

 

Hope to help

Dirk

Click for thumbs down.0Click for thumbs up.0